Description
Laser array for escape room green laser maze room escape props custom props for escape game
Product name:The Laser array
Brief introduction:
There is laser array in the room,players must across the laser array without touching any of the green lasers and press the green button at the end of this array. This prop has anti-cheating mechanism. There are three invisible infrared rays in the array. Adventurers should touch all the three infrared rays to prove they really do across this array instead of some cheatings.
Prop list:
1)Four laser receivers
2)Four laser transmitters
3)Three infrared sensors
4)One alarm
5)Six 12v power adpters
6)One controller
7)Two plastic buttons
PS:Reflector is NOT included.
Product highlights:
1. The quantity of lasers is optional(3-12).
2. The audio of TF card inside the controller can be revised.
3. This prop has anti-cheating mechanism.
4. This prop can be customized as your requirement,just let us know your idea.
How to play:
1. When get 12v power supply on the controller, but without powering on the transmitters of laser, the system enters standby mode. Then power on the transmitters, the alarm system lights on and let out a warning sound. Then press the red button, the system will be in activated.
2. Player will find a four-laser array in the room (Owner can increase or decrease the quantity of the lasers), the EM lock gets closed tightly.
3. When players touch any one of the lasers during the game,alarm light will ring,which means the game has failed, the EM lock is still closed. When they press the green button to open the door, the door can’t be opened, They should press the red reset button at the beginning of the array and cross it again.
4. This prop has anti-cheating mechanism. There are three invisible infrared rays in the array. Adventurers should touch all the three infrared rays to prove they really do across this array instead of some cheatings.
5. When players across the laser array successfully and touch the three infrared rays,the system will play a sound, and press the green button for opening the door, then one lock will release.
How to reset:
1:Press the red button(start botton) to reset
2:Re-power to reset
Additional point
Reflector:it can reflect the laser,that is to say,after receiving the laser beam from the laser transmitter,the mirror reflects the laser back to the laser receiver(one laser can change as two lasers).
This reflector is NOT included in this laser array,you can prepare it by yourself or contact us to order it.
How to connect the EM lock with the controller?
The red wire of the EM lock(12V +) should be connected with the red line of the controller. And the black wire of the controller(12V-) should connect with the black line of the EM lock.
Warm Tips: The 12V EM lock is exclusive of our props. You can buy this EM lock from our link.
