Description

D2 lamp  deuterium lamp power supply,deuterium lamp driver for UV spectra chromatography , atomic absorption,.

 

Contact us if you need user manual !  Please tell us your lamp’s voltage (2.5V or 10V) before you place an order!

 

DEUTERIUM LAMP POWER SUPPLY

 

 

 

Part1……………………………………………………………………………………………………..Introduction

Part 2………………………………………………………………………………. Environmental Requirement

Part 3………………………………………………………………………………………… Technical parameters

Part 4……………………………………………………………………………………………………………. Wiring

Part 5……………………………………………………………………………………………… Light up the lamp

Part 6……………………………………………………………………………………… Installation and Cooling

Part 7…………………………………………………………………………………. Transportation and storage

Part 8…………………………………………………………………………………Maintenance and attention

 

 

 

 

 

Part 1:Introduction

OWPS series Deuterium lamp power supply was developed by OWO team in 2013,and its perfect replacement for expensive original models, the product has CE proved and 18 months warranty.

OWO now offer Deuterium lamp power supply that is commonly used in UV spectra chromatography , atomic absorption, UV-Visible spectrophotometer and other spectroscopic equipments.

 

Compared to the traditional linear power supplies this deuterium lamp switching power supply abolishes cumbersome transformers, it has set filament preheat, high voltage trigger and constant current control are just a number of features the deuterium power supply to ensure the stability of UV spectra. A small compact size, light weight and one of the biggest advantage is applicable to international mains input Voltage in the 85 -265V AC, no switching required! The power supply also has control port allowing external control signals (such as CPU or manual) which can easily turn on or off the deuterium lamp.

OWPS series deuterium power supply has professional anti-electromagnetic interference design, the electromagnetic interference reach to grade A.

 

OWPS series deuterium power supply has two models,OWPS-02162.5 apply to the lamp at filament voltage 2.5V, OWPS-021610B apply to the lamp at filament voltage 10V.please make sure you choose the right model for your usage.

 

 

Part 2: Environmental Requirement

1. operating environment:

Temp.: 0-40℃

RH: 40℃(20-90)% RH

Pressure: 86-106 KPa

2. storage environment:

Temp.: -40-70℃

RH: 50℃ 90% RH

Pressure: 86-106 KPa

 

Part 3:Technical parameters

OWPS-02162.5	OWPS-031510
Voltage input: AC 85 ~ 265V	Voltage input: AC 85 ~ 265V
Maximum input current:0.5A	Maximum input current:0.5A
Filament voltage: Preheat:DC 2.5V Working:0V	Filament voltage: Preheat:DC 10V Working:6-7V
Maximum anode voltage: Preheat:DC 125V Working:DC 80V	Maximum anode voltage: Preheat:DC 125V Working:DC 80V
Anode current:300mA	Anode current:300mA
Constant flow accuracy: 0.05‰(after starting 1h)	Constant flow accuracy: 0.05‰(after starting 1h)
Minimum trigger voltage:DC 550V	Minimum trigger voltage:DC 550V
Withstanding Voltage:AC 1500V / 1min	Withstanding Voltage:AC 1500V / 1min
Turn off signal: 3 ~ 12V / 1 mA	Turn off signal: 3 ~ 12V / 1 mA
Dimension:130 * 99 * 40 mm	Dimension:130 * 99 * 40 mm
Net Weight:0.4kg	Net Weight:0.4kg

 

OWO now offer a D2 Deuterium lamp power supply that is commonly used in UV spectra chromatography , atomic absorption, UV-Visible spectrophometers and other spectroscopic equipment.

 

Compared to the traditional linear power supplies this deuterium lamp switching power supply abolishes cumbersome transformers, it has set filament preheat, high voltage trigger and constant current control are just a number of features the D2 power supply to ensure the stability of UV spectra. A small compact size, light weight and one of the biggest advantage is applicable to international mains input Voltage in the 85 -265V AC, no switching required! The power supply also has control port allowing external control signals (such as CPU or manual) which can easily turn on or off the deuterium lamp.