Description

GP2A200LCS0F Series are OPIC output, reflective photointerrupters with emitter and detector facing the same direction in a molding that provides non-contact sensing. This family of devices uses light modulation to educe the affects of disturbing light, and the sensor is optimized to work in the selected focal distance. A 3-pin connector is included to allow remote-mount or off-board designs.

Reﬂective with OPIC Light Modulated Output
Highlights Includes additional screw ﬁ xing holes, Position pin to prevent mis-alignment, Long focal distance
RoHS directive compliant

Specifications:

Attribute	Value
Peak Sensor Distance	22 (Detection) mm, 90 (Non-Detection) mm
Output Device	Photointerrupter
Mounting Type	Surface Mount
Dimensions	39.8 x 9 x 8.65mm
Height	8.65mm
Length	39.8mm
Maximum Operating Temperature	+70°C
Minimum Operating Temperature	-10°C
Width	9mm
Operating Temperature Range	-10 → +70°C
Output Signal Type	Analogue

Detecting Distance : 2 to 22mm
*OPIC Output, Refl ective Photointerrupter with Connector

■Agency approvals/Compliance
1. Compliant with RoHS directive
■Applications
1. General purpose detection of paper presence or motion.
2. Example: PPC, FAX, Pr

GP2A200LCS0F Series are OPIC output, reflective photointerrupters with emitter and detector facing the same direction in a molding that provides non-contact sensing. This family of devices uses light modulation to reduce the affects of disturbing light, and the sensor is optimized to work in the selected focal distance. A 3-pin connector is included to allow remote-mount or off-board designs.

■Features

1. Refl ective with OPIC Light Modulated Output

2. Highlights :
• Includes additional screw fi xing holes
• Position pin to prevent mis-alignment
• Long focal distance

3. Key Parameters :
• Detecting distance : 2 to 22mm (White paper) 5 to 15mm (Black paper)
• Undetecting distance : over 90mm (White paper)
• Connector : GP2A200LCS0F ; Tyco Electronics AMP K.K. (PN : 292133-3)

4. RoHS directive compliant