445nm/5500mw Blue-Violet Light Laser Module Kit for CNC Machine 1810-PRO/3018/3018-PRO Cutting TTL Module
SPECIFICATION
Heatsink Material: Aluminum
Output Power: 5500mw
Wave Length: 445nm blue laser
Voltage: 12V
Current: 2A
Beam Shape: Dot (focus adjustable)
Life Time: >10,000 hours
Working Temperature: -40~75℃
Applied Materials: MDF/ Balsa/ Paper / Wood/ Fabric/ Plastic/ Leather/ Plywood/ Foam Paper/ Anodized Aluminum
Application: The laser module is ideal for engraving, cutting, scribing, and drilling. Desired patterns can be made easily on the wood or
Attention:
1. Please wear laser goggles during usage, avoid to touch the laser directly to the eyes and skin.
2. In order to avoid unexpected accident happens, please stay with the machine while the laser module is working.
WHAT’S INCLUDED?
1 x Blue Laser Module
1 x Cable 3p to 3p
1 x Cable 3p to 2p+2p
1 x Goggles
NOTE: Please don’t press the button on the module when laser engraving.
When you connect laser to your controller board, please pay attention to the pin positions of 12v+ GND- and PWM/TTL, red wire=12V+, black wire=GND-. Yello wire=PWM+, white wire=PWM-(3-4pin wire). So Red Wire must be connected to the 12v+ pin on your controller board’s interface, Black Wire Must be connected to the GND- pin and Yellow Wire must be connected to the PWM/TTL pin, if you use 3-4pin wire, White wire should be connected to the PWM- pin.
if your controller board’s laser interface pins are in different position, please change the wires position to make it match the positions of + – PWM of your interface. If the wires connected wrong, it will damage the diode and the driver board.
Please add a fan when you engraving or cutting, in case smoke blur the lens damage the lens
F.A.Q:
Q: Does this machine need to be assembled when I received it?
A: This machine comes as a kit. You need to assemble it yourself. All tools and part are included
in the kit.
Q: Are there software and instructions can I get it?
A:You can get the software ,contact us.
Q: Whick type computer system can run its software?
A:The software only support the Windows system.
Q: What’s the laser’s lifetime?
A: The laser module have over 6,000 hours lifetime.
Q: What material can it engrave?
A:Wood, bamboo, plastic, paper, leather, rubber.
Q:What material can it cut?
A:cork wood, paper, thin leather.
Q:Can I use it to cut or engrave on metal?
A:It can not engrave or cut on any metal.
Q: Can I regulate the laser power or the laser power is adjustable?
A: Sorry that the Fixed laser power is not adjustable, but the engraving speed is adjustable.
Q: How long can the machine work continuously?
A: It can work continuously about 45 minutes, after the laser mould cool down(about half of an
hour), then start work again. Long time work continuously with shorten the laser module
liftetime.
Q: When I receive it, how to let it work?
A: Fist of all, you need to plug the stepper motor power cable to the controller board, then installl
the software and the driver, power supply the machine,that’s all.
