Description

Description:
7000mW 445nm blue laser module, designed with longer heat sink shell which make sure a better heat dissipation performance is suitable for EleksMaker laser engraver, and also other engraver that ensures XH2.54-3P+2P interface and DC 12V input voltage. 7000mW fixed focus laser module can engrave on metal surface.

Specification:

General Specification
Model	XSB15D
Heatsink Material	Aircraft Aluminum
Section Size	40mm x 40mm
Cooling Mode	Heat Sink Groove, Cooling Fan
Dimension	116 x 40 x 40mm
Adapter Plug	US Plug
Adapter Input Voltage	AC 100-240V
Adapter Output Voltage	DC 12V 2.5A
Can Engrave	Metal/Stainless Steel/ MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum
Can Not Engrave:	Glass/Stone/Ceramics/Stainless Steel/Reflective Material/ Transparent Material
Technical Parameters
Laser Power	7000mW
Laser Wavelength	445nm (Blue)
Beam Shape	Dot (Focusable)
Power Supply	DC 12V
TTL/PWM Modulation	YES
Input Interface	2.54-3P+2P
Drive Mode	External ACC

Features:

1. XSB15D new series of laser modules, exquisite workmanship and nice appearance.
2. 445nm 7000mW focusable blue laser module, with TTL/PWM functions.
3. Aircraft aluminum heatsink with cooling fan ensure long working time continuously.
4. Equipped with constant-current driver board ensure stable output optical power, low heat no external driver board needed, easy to use.
5. 3 pins plug, 2.54-3P+2P input interface, TTL/PWM drive mode, suitable for laser engraving machine equipment usage.
6. Can Engrave: Metal, Wood, Plastic, PCB, Paper, Bamboo, Ox Horn, Leather, Sponge Paper, etc.
Can Not Engrave: Stone, Ceramics, Glass, Reflective or Transparent Material.

* This module can be compatible with TTL and PWM modulation while TTL can control the switch on/off and PWM can control the adjustment of laser power.

Protective Lens Cleaning Method:
1. Prepare cotton swab and lens cloth.
2. Wrap one or two layers of lens cloth around the head of the swab and dip a small amount of water of cleaning agent in the head.
3. Use the cotton swab head wrapped in the cleaning cloth to gently press the protective lens and wipe the area back and forth until the lens is clean.

Notice:
1. Never engrave the mirror metal, otherwise the reflected light will damage the laser.
2. Please wear laser goggles during usage, avoid to touch the laser directly to the eyes and skin! Keep away from children and pets.
3. Usually used for EleksMaker laser machine, 3 pins connector cable is needed to connect to the EleksMaker Board. This item will come with the cable, and the cable from your A3 machine is also suitable.
4. Note that the laser module works less than half an hour in one time, and please wait until it has cooled down before continuing the work.
5. The product has been installed the protective lens. It can be cleaned by yourself. Please avoid the lens be dirtied by smoke when you carve the surface of producing smoke. If this happened, please clean the lens with lens cloth or lens paper.

Package Included:
1 x 7000mW Blue Laser Module
1 x Power Adapter
1 x 3 Pin Plug
1 x Mini Test Controller Board
2 x Fixed Focal Columns