Description

CNC 3018/2418/1610 Laser CNC Engraving Machine Control Board GRBL Control Board TTL Can Be Offline

 

 

Three advantages of the 3018/2418/1610 dedicated control board:

1. Laser output 12V 775 motor output 24V

2. Laser output 2P/3P supports pwm TTL function

3. Support offline, Bluetooth function.

 

Features of offline control:

press Z+ and Z-: the Z axis will move up and down.

press X+ and X-: the X axis will move left and right.

press Y+ and Y-: the Y axis will move Front and Back.

press  SPIN: Spindle on (Laser on ), Spindle off (laser off)

press Z+ for 5 seconds:   change the Language to English.

press SMOD: return.

SD card: SD card reader is to write into the root directory G-code files.

 

Advantages of CNC Controller:

1. Double Y Axis, 3 axis drive;

2. Can be connected with offline controller;

3. With a function of bluetooth;

4. With a function of cutter setting.

 

Specification:

Double Y-axis, all-round use,XYZ or XYY.

Supports 12V TTL laser and no TTL laser

Support for 775 motors.

The drive current can be adjusted

Support xyz limit switch, probe interface

Support for laser or motors

The A4988 can be replaced with the 8825 driver.

Integrated 3 A4988 drivers, directly connect to four wire stepper motor.

Applicable: 2-phase 4-wire stepper motor; laser module within 10W (supports 2P interface/3P interface).

for Laser Engraving machine, Drawer Machine, CNC Engraving Machine etc.

 

 

packing list:

1 x control panel

1 x USB cable

OR

1 x offline controller board

1x USB Cable

1 x1.8 Inch offine controller

OR

1 x offline controller board

1x USB Cable

1x 3 axis control board

 

Please note the positive and negative poles, make the right connection.

Its not seller’s responsibility if the fault was from this.