•  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
• • Product Information
  • Name:Laser Protective Glasses
  • Number: BP-3003
  • Color: The Font Color:
  • Product Features
  •  B & P Laser Safety Glasses Are a Kind of High-Efficiency Explosion-Proof Safety Goggles Made of Polycarbonate (PC) and Special Wavelength Light Absorption Materials Imported from Australia. Its Optical Safety Performance Fully Meets GJB1762-93 “Laser Goggles and Physiological Health Standards”. Comfortable, Beautiful, Safe and Reliable to Wear. Laser Safety Glasses Adopt the Principle of Light Absorption: It Has No Selectivity to the Light Source and Can Safely Protect All Kinds of Bounce Light; It Has No Selectivity to the Incident Angle of the Light Source and Can Fully Protect the Laser and Strong Light of Specific Wave Band. The Photoreactive Faster. The Attenuation Rate Is Relatively High. The Surface Is Not Afraid of Abrasion, Even If There Is Scratch, It Will Not Affect the Safety Protection of Light.

Product Detail

Laser Glasses Introduction

Principle

B & P/T-REX Laser Safety Protection Glasses Adopt the Principle of Light Absorption: There Is No Selectivity to the Light Source, Which Can Safely Protect Various Bounce Light; There Is No Selectivity to the Incident Angle of the Light Source, it Can Protect the Laser and Strong Light of Specific Wave Band in All Directions. The Photoreactive Faster. The Attenuation Rate Is Relatively High. The Surface Is Not Afraid of Abrasion, Even If There Is Scratching, It Will Not Affect the Safety Protection of Light, and Can Effectively Protect Your Eyes in All Directions.

1. Reflective Laser Goggles Is Plated on the Surface of the Base Optical Glass to Multi-Storey The Reflective Medium Layer.

Advantages:

1. Simple Process;

2. High Visible Light Transmittance;

3. High Attenuation Rate;

4. the Light Reaction Time Is Less than 10-9 Seconds;

Disadvantages:

1. It Has Serious Selectivity to the Light Source. The Incident Light Source Must Be Facing the Protection Mirror (the Incident Light Is in the Normal Direction of the Mirror), and Its Protection Effect Is the Largest, and Vice Versa.

Otherwise, Blue Drift Will Occur. the Larger the Incident Angle Is, the Shorter the Protection Wavelength Will Drift. When the Protection Band Is Not Wide Enough Or the Protection Wavelength Is Short, It May Appear Oblique Incident.

2. the Reflective Medium Layer Is Easy to Take off, and It Is Not Easy to Observe with Naked Eyes after Falling off, Which Is Also the Most Dangerous,. Domestic Reflective Medium Layer Generally Falls off in about One Year. The Higher the Light Attenuation Rate Is, the Thicker the Plating Medium Layer Is, the Easier It Is to Fall off.

Second, Absorption Protective Eyewear Add Special Absorbent to the Base Material Pc.

Advantages:

1. It Has No Selectivity to the Light Source and Can Safely Protect Various Bounce Light; Incident Light from Any Angle Can Be Protected Equally Efficiently.

2. High Attenuation Rate;

3, the Surface Is Not Afraid of Wear, Even If There Is Scratch, It Does Not Affect the Safety Protection of Light;

4. the Light Reaction Is Faster <10-9 Seconds;

5. at the Same Time, It Has Good Shielding Property for Dazzling White Light Generated during Laser Operation.

Disadvantages: Low Visible Light Transmittance

Third; Optical Density (OD)

It Is Used to Indicate the Percentage of the Laser of a Certain Special Wavelength That Can Pass the Laser Protective Glasses.

For Example; OD1 +: the 10% a Special Wavelength of the Laser Can Be through State-of-the-Art Laser Protective Glasses

They Are as Follows:

OD2+:1%

OD3+:0.1%                                                          

OD4+:0.001%

OD5+:0.0001%

OD6+:0.00001%

OD7+:0.000001%

Fourth, Visible Light Transmittance (VLT%)

It Is Used to Indicate the Percentage of Laser Protective Glasses That Visible Light Can Pass through. The Higher the VLT% Is, the Brighter the Lens Will Be and the Clearer the Field of Vision Will Be.

At the Same Time, Optical Density (OD) Will Affect the Light Transmittance. Because Our Laser Protective Glasses Are Absorption Type, the Production Process Determines That to Achieve High Optical Density, Some Light Transmittance Will Be Lost. If the Requirement for Optical Density Is Lower, the Light Transmittance Can Be Improved, So That the Field of Vision Will Be Clearer. Laser Protective Glasses Is a Kind of High-Efficiency Explosion-Proof Safety Goggles Made of PC Polymer Materials and Special Wavelength Light Absorption Materials.

Laser Protective Glasses Have Polytype, with Different Materials, Principles and Application Occasions. Laser Protective Glasses Are Worn in Laser Operating Environment, it Will Feel a Little Uncomfortable to Wear in Non-Working Environment, and It Will Adapt to It after a Long Time. Laser Protective Glasses Are Effective Laser Protection, and the Logical Choice Must Be Made for the Laser Goggles According to the Specific Use Requirements. When Selecting the Protective Eyewear, Firstly Determine the Maximum Irradiance Or Maximum Irradiance of Laser Output According to the Parameters Such as the Maximum Output Power (Or Energy) Beam Diameter and Pulse Time of the Laser Used. Then, According to the Phase, Determine the Minimum Optical Density Value Required by the Glasses According to the Maximum Allowable Exposure Amount (Eye Exposure Limit Value) of the Wavelength and Irradiation Time, and Select the Appropriate Protective Eyewear Accordingly.

1.Item will be shipped within 1-5 business days.
2.We will send items within 1-5 business days after receiving cleared payment without other special situation.
3.Items are shipped through international airmail by china post,Normally,we provide the registered parcel service for item shipping,with tracking number.Under normal circumstances,shipping take approximately 15-30 business days.Sometimes delivery will take longer if the package is selected by customs for random checking.Buyer pay for shipping and handling fees,which is non-refundable.We ship to worldwide and the shipping and handling fee is the same.
4.The delivery time ultimately depends on the efficiency of the customs and the courier service company.
5.For international Buyers,please note:
Import duties ,taxes and charges are not included in the item unit price.These charges are buyer’s responsibility.
Please check with your country customs office to determine what these additional costs.We are only responsible for shipping,as we are not responsible for customs clearance.
Buyers need to handle customs clearance by them own,customs clearance as a result of the refund will not be accepted.
Feedback:
1.Your feedback is really important to us,please take a few seconds to leave a great
feedback if you are satisfied with our products and service,thank you so much.
2.We always offer the best price of best products and service to you.
3.Please contact us through Aliexpress or Email before leaving neutral (3 stars),or negative(1-2stars)feedback.We will try our best to solve the problem and leave you a happy shopping mood here,thank you .

PENGBO ENTERPRISE CO., LIMITED is one of the few true manufacturer, exporter and wholesale establishments in the industry. We own and operated a factory located in Guangzhou China. We offer one of the largest selections of styles on the market and carry an assortment of metal and plastic styles in various combinations of lenses. Since our entry in to the market, we strived to be the best in the market on our quality, craftsmanship and customer service. For a better look at our sunglasses styles, please visit our online product catalog.

Our products are among the top echelon of value-priced eyewear products in the market.. Our sunglasses style includes men and woman in fashion and sports, kids sunglasses, driving lenses, polarized lenses, reading glasses, sunglasses accessories, ski goggle, safety glasses, motorcycle glasses and so on. We constantly update our inventory with new styles weekly and keep our inventory filled will the most popular and up to date styles on the market.

With our knowledgeable staff, you can expect us to offer you great suggestions and support for your market area and programs. With many years of experience in this field, we can help with setting up your business, choosing styles. We also provide private labeling for you. If you have any questions please feel free to let us help you.

En207 CE Certificate for IPL Laser Glasses                                                             Factory FDA and Some Product Test Reports                                       

 For Other Product Connections, Please Click to View More Assorted Styles.

• 

  Laser Protective Glasses

• 

  Outdoor Impact Glasses

• 

  Children’s Sunglasses

• 

  Imported Sheet Sunglasses

• • BP-1146 Style
  •  
  •