Description

 

Ruida RD6332M Metal Laser Cutting Controller for Metal & Non-metal Mixed Laser Engraving and Cutting Machine

 

(If you need the Manual and Software, please contact us,leave message,we will send by Email to you.)

 

 

Metal and Non-metal Laser Cutting Controller ( RDC6332M)

Adaptive software:  MetalCut

 

Technical parameters:

• Digital laser control signals, differential output, TTL level, up to 20mA driving capability

• PWM frequency can be adjusted from 2.5KHz to 100KHz. PWM duty ratio is 1%~99%

• Laser power control: analog voltage, 0~5V adjustable according to the motor control signal differential output, TTL level, 20mA driving capability, the max. motor control pulse frequency is 500KHZ.

• The USB max. transmission speed is 12 Mbps, the longest distance is 5 meter.

• 4-way generalphotoelectric isolation OC gate output, the max.drive capability is 600mA.

• Linear/ circular/B Spline interpolation precision: +/-0.5pulse

• 4-way generalphotoelectric isolation, TTL level

 

Application Area:Metal and non-metal laser cutting

 

Product Introduction:

Metal and non-metal laser cutting system is based on the RDC6332M motion controller.Employed with thin metal plate and non-metal laser cutting techniques, this control system is suitable for non-metal laser cutting and metal laser cutting. 

 

Functions:

• System encryption and parameters storage on board, file storage capacity is up to 256M.

• Customized boot screen, controller kernel program upgrade remotely

• 2-way digital/analog laser control interface

• Dedicated RF laser control interface 

• At most 4-axis stepper/servo motor open/closed loop control

• Soft/ hard limit coordinates protection for optional

• Linear, circular arc and B Spline interpolation

• Flexible dedicated LFS interface, supporting many manufactory’s LFS system 

• Support various metal cutting technology control

 

Product Accessories:

controller, display panel, shielded Ethernet cable, shielded USB cable, 3.81mm terminal

Mainboard Size:220mm * 134mm

Extension interfaceboard size:170mm*120mm

Power Source:24V/3A