10S 11S 12S 13S 14S 15S 16S 17S 18S 19S 20S 21S 22S 23S 24S 3.7V Li-on Cell

3.2V Lifepo4 2.4V LTO Battery 1MV Precision 4A Active Balance BMS with

Bluetooth APP Balancer Equalizer

Function explanation:
①, each channel is 4A high current active balance
② Support ternary lithium battery, lithium iron phosphate battery, lithium titanate battery
③. Support Bluetooth communication to connect to the mobile phone APP to check the condition, balance state, and current of each cell, you can see the voltage of each cell, and whether the internal resistance of the equalization line is normal
④, with the function of wrong wire protection board, battery detection function, fault alarm function
This product supports Bluetooth support APP

Instructions for use:

4 strings can be used between 10-24 strings, and the allowable voltage is 1.8V-4.5V, that is, ternary, iron lithium, and lithium titanate, all can be used.
(Note: In theory, this protection board can support 2-24S batteries, but after our long-term aging test, the board works best on the 10S-24S battery pack. No external power supply is required, and it can be used for a long time without failure. For battery packs below 10S, the board needs to be powered separately within 10S, and the power supply voltage is DC30-100V DC power supply. If customers have strong hands-on ability, they can also try to use the battery packs below 10S)

3 lights annotations on the shell (blue, red, green)

Blue is the Bluetooth status indicator: always on, the link is successful
Flashing, link down
Red is the fault status indicator: always on, internal fault
Flashing, battery test failed
Green is the working status indicator: always on, the balance is completed
Flashing, balanced work

Wiring diagram for battery packs less than 10S:

Wiring diagram for 24 series flying supercapacitor intelligent active equalizer application, connect to a battery pack less than 10S, just follow this wiring diagram to connect, need external power supply DC-30-100V voltage,

10S 11S 12S 13S 14S 15S 16S 17S 18S 19S 20S 21S 22S 23S 24S wiring diagram:

24 series flying super capacitor intelligent active equalizer application wiring diagram, connect to a battery pack of 10S or more, refer to the following diagram, connect according to actual needs, no external power supply is required,

APP connection steps

①Click the BMS column to enter the scanning interface
②Enter the scan interface, click scan, and actively search for the balanced motherboard within the Bluetooth recognition range
③Click 24SEB here to enter the real-time data panel
④Check the real-time status of battery cells
⑤Set the number of battery cells and balance the parameter value
⑥ View battery pack alarm information